LED Hood Beam Light

LED Hood Beam Light

Dynamic startup technology allows for a smooth transition between on and off. Easy installation and compact fit creates an aura which projects the led between the hood avoiding a spotty patchy look and instead creating a sleek beam like lighting.

With a unique dynamic startup and multiple different connections to choose from the Hood Beam is built different. Add a little something extra that will leave your friends speechless. Animated GIF

FAQ：

Q: What is the difference between the new dynamic scanning version and the old version of the constant light?

A: The new dynamic scan version is first dynamic scan and then always on; the old version of the permanent light version is open directly when the permanent light

Q: Can be cut short?

A: The dynamic scanning model is not recommended to be cut short because the midpoint of the flow will not be automatically centered after cutting.

Features:
1. Newly designed car decorative lights with start-up scanning function.
2. High light lamp beads, 50% brightness than the other.
3. Side LED and corresponding hood design can provide you better lighting effect.
4. Independent voltage regulator, better voltage regulation function, longer lifespan

Light source: LED

Voatge:12V

Lumen:3000LM

Protection level: IP 68

Longer: Can be cut

Feature: Start sequential scan mode, Breathing mode, Meteor Mode

Application: Daytime running light, Headlight strip, Car door light, Auto Tailgate light, Car Engine Cover Light, Car hood light, Car pedal light

How to install the light strip

Apply double-sided tape to the two inner sides of the cover.

Fix the light bar on the double-sided tape.

Installation method

1. The black wire is connected to the negative pole + the red wire is connected to ACC = the engine starts to light up.

2. The black wire is connected to the negative pole + the red wire is connected to DRL = turn on DRL to light up.

【Dynamic Scan Start Up Hoodbeam Kit】 — Newly designed LED Hood Beam Light with start-up scanning function. Independent voltage regulator, better voltage regulation function, super durable and flexible with up to 30, 000 hours lifespan. (The Multi-colour styles can be controlled remotely using the app and has an additional remote control that can be used from up to 20 feet away.)

【Unique Design】 — Led Strip Lights is flexible. The length can be cut and installed at will. Tube strip design, bend, twist and contour around any surface, soft and easy to make any shapes to fit into your car headlight or hood retrofit. The operating voltage is 10-15V. Design of low power characteristics, Short circuit protection and moisture-proof coating protection are built in the highlight led lamp. so that we use more secure and environmentally friendly.

【Safety Material】 — Car Decor Atmosphere Light is made of silicone, Led. The light strip is in IP65 sealed housing, which can be waterproof, dust-proof and anti exposure. Suitable for all kinds of weather, Raining, Snowing, Sandstorm, Foggy day, Haze days. Non-heating elastic material. High quality lamp beads, super brightness.

【Easy Installation】 — This car LED strip light is easy to install, no need to remove the headlight. There is super glue on the back of the light strip, which is strong sticker, it is not easy to fall off. It can be connected to the clearance of the engine hood without changing the wiring. Led Strip Lights can be bent, pasted or hung, and can be made into any figure. Plug and play.

【Widely Application】 — Enhance safety warning of driving or turn signal when light is insufficient, effectively make oncoming vehicles or pedestrians notice oncoming traffic and increase travel safety. Car hood decoration light can be widely used in cars, SUVs, Trucks, Vans, Jeep. Can be install in car hood, front grille, car door, tailgate ect. If you want, it can decorate any environment.

What is the difference between LED bulbs and LED strip lights?

LED bulbs and LED strip lights serve different purposes and have distinct characteristics:

Design and Structure:
• LED Bulbs: These are designed to fit into standard light fixtures and provide broad, general illumination. They mimic traditional bulbs but with the efficiency and longevity of LED technology.

• LED Strip Lights: These consist of multiple LEDs mounted on a flexible strip, which can be cut to size and adhered to various surfaces. They offer more focused and directional lighting.

Installation:
• LED Bulbs: Installation is straightforward, typically involving screwing the bulb into an existing socket.

• LED Strip Lights: Installation can be more complex, often requiring additional components like power supplies and controllers. They can be mounted under cabinets, along walls, or in other creative locations.

Applications:
• LED Bulbs: Ideal for general room lighting, task lighting, and fixtures where a broad light spread is needed.

• LED Strip Lights: Perfect for accent lighting, under-cabinet lighting, and decorative purposes. They are often used to create ambiance or highlight specific areas.

Flexibility:
• LED Bulbs: Less flexible in terms of placement since they need to fit into a socket.

• LED Strip Lights: Highly flexible and can be installed in various shapes and locations, making them versatile for creative lighting solutions.

Brightness and Coverage:
• LED Bulbs: Provide robust and consistent light output suitable for illuminating entire rooms.

How does cutting LED strips work?

Cutting LED strip lights is a straightforward process, but it requires some precision to ensure the strips continue to function correctly. Here are the steps:

1. 1. Measure the Length: Determine the exact length you need for your project. LED strips usually come in long rolls, so measure the area where you plan to install them.
2. Locate the Cut Line: LED strips have designated cut points, typically marked by a pair of copper dots or a dashed line. These points are spaced at regular intervals along the strip.
3. Cut the Strip: Use sharp scissors or a knife to cut along the marked line. Make sure to cut precisely between the copper dots to avoid damaging the LEDs.
4. Connect the Strips: After cutting, you can connect the strips using quick connectors or by soldering. Quick connectors are easier and involve aligning the copper pads on the strip with the connectors’ pins. Soldering provides a more secure connection but requires more skill and equipment.
5. Power the Strips: Ensure that the power supply matches the voltage and wattage requirements of your LED strips.