WiFi Booster

WiFi Booster

Routers can deliver strong WiFi signals to near devices, but their capacity to reach distant ones in the same place can be limited. It may leave you with a dead signal in some areas of your home.

The solution is the WiFi Booster! With this device, enjoy your internet access with a strong, stable WiFi signal anywhere in your home. It is plug and play, small, and takes only a few minutes to install. Get as many as you need and place them wherever the WiFi signal is weak. You will have a strong signal to stream games or watch movies online using all the bandwidth you are paying for!

Q&A

Q1. Can’t see WiFi Repeater on smartphone or computer?

A1. ① Please check whether the second light on the repeater is flickering/blinking/flashing or not underpowered. If not, please long-press the reset button for 10 seconds to reset the repeater first. ② The network name (SSID) of the wifi from the router must be set to “visible.”
Q2. Can’t enter setting page 192.168.10.1 ?
A2. Please change to another browser and try again, such as Google Chrome or Firefox. If you set it up on the computer, please check the IP address on your computer; see the details on page 10 of the manual.
Q3. Can’t connect to the internet after finishing setting?
A3. Please check whether you enter the same password as your router, and check if there are any special characters in it, such as ~!@#$%^&*(). If yes, please change your router password. The repeater cannot identify special characters.
Q4. How to reset the repeater?
A4. Please long-press the reset button for 10 seconds under power. (NOT WPS button; the reset button is at the side.)

Q5. Where can I get the upgrade firmware?
A5. Our repeater is the newest model and generally does not need to be upgraded. If the repeater stops working suddenly, please reset it first. Contact us if it still does not work after the reset.
Q6. What is the status of the repeater working normally?
A6. Underpowered, the second light flickering/blinking/flashing means the repeater is working normally. If the second light is fixed or OFF, it means the repeater needs us to reset it first.
Precautions
In order to protect the life of the repeater, reduce the loss of product use. Please do not use the repeater for a long time (more than 24 hours ). When you do not need to use it, please take it out from the power supply.

• Improve wireless coverage in all WLAN networks.
• Access to the Internet for computers located on the edge or outside of the range of your access point.
• Complies with IEEE 802.11n, IEEE 802.11g, and IEEE 802.11b standards .
• Provides up to 300 Mbps transmission rates.
• Support 2.4 GHz WLAN networks.
• Maximum WLAN security with WPA2, WPA, and WEP (128/64).
• Software wizard for simple setup.
• 2dBi antennas integrated
• Support Wireless Repeater Mode and Standard AP Mode.
• Provides one 10/100 Mbps auto-negotiation Ethernet LAN port.
• correct the language and the stability of signal
• revise default reboot
• The former version needed a reticle to reboot, but now it does not.
• The 2 version can support Chinese and English

Product Type: WIFI Repeater
Colour: White Black
Plug Type: EU / US / UK Plug
Voltage: AC 110-240V
Output: 5V 1A
Frequency Range: 2.41-2.48 GHz
Max Transmission Speed: 300 Mbps
Support Mode: Repeater Mode / AP Mode
Connectivity Type: Wireless/Wired
Networking Cable Length: Approx. 1m

1x Wireless WiFi Repeater

1x RJ-45 Networking Cable

1x Installation Guide